Airless Spray Gun (Contractor 2F) — 248 bar
A professional two-finger airless spray gun supplied as a complete, ready-to-work kit for hydrodynamic (airless) sprayers. Rated to a maximum working pressure of 248 bar (≈3600 PSI), it holds a clean, stable spray pattern on wall, acrylic, latex and emulsion paints, with the comfortable two-finger trigger that suits work with frequent starts and stops.
In the box
- —Two-finger airless spray gun (metal body, ergonomic grip, trigger guard)
- —Fine-finish low-pressure 516 reversible tip
- —Matching reversible tip guard
- —Reversible guard seal
- —60-mesh gun filter
- —Factory packaging
Fine-finish low-pressure tip (516)
The fine-finish low-pressure tip is designed to spray at a lower working pressure than standard high-pressure tips, which means:
- —Less dusting and spray fog, and less paint bounce off the surface
- —A softer, more even spray pattern with better control
- —Less material loss and less load on the pump and accessories
Tip data: fan width about 25 cm, orifice 0.016″ (≈0.41 mm), reversible guard system. Raise the pressure gradually until the fan is even. Suitable for acrylic, latex, emulsion and standard wall paints, selected façade paints, and some enamels, urethanes and epoxies.
Reverse-to-clean guard
The reversible guard seats the tip, sets the spray direction and turns 180° so a blocked tip is cleared in seconds — no need to strip the gun down. The 60-mesh filter traps debris before the tip for a cleaner finish and fewer blockages; inspect and clean it regularly with thicker materials.
Connections & compatibility
- —High-pressure hose inlet: 1/4″
- —Accessory / guard outlet: 7/8″ (≈22 mm) — extension-ready
- —Fits common airless units using the standard reversible-tip mount
Applications
Walls, ceilings, drywall, fences and structures; flats, houses, commercial premises and halls; larger interior, renovation and finishing surfaces.
You might also like






