Accessories & add-ons

Professional high-pressure hose that carries coating from the pump to the spray gun. Choose the diameter for your material flow and the length for your reach — a larger bore reduces pressure loss on long runs. Rated for professional airless use.

Reversible airless tip designed for efficient spraying at reduced pressure, for a softer, controlled spray pattern with less overspray on suitable materials. Pick the size for your coating — smaller numbers suit lacquers and primers, larger numbers suit wall paints and dispersions. The tip number sets the fan width (first digit) and the orifice (last two digits).

Reversible airless tip designed for spraying at lower pressure on general architectural interior and exterior coatings. Lower working pressure can mean less overspray and easier control on the wall. Choose the size to match your material and the surface you are covering.

Reversible airless tip for fine finishing: lacquers, enamels, furniture, doors, cabinetry and metalwork. The small orifice sizes lay down a smooth, even film for high-quality surfaces. Choose the size for your material and the finish you need.

Conventional reversible "reverse-to-clean" airless tip for everyday spraying — flip it to clear a clog without opening the gun. A broad size range covers primers and fine finishes through wall paints, dispersions and heavier coatings. The first digit sets the fan width and the last two the orifice.

Reversible airless tip with large orifice sizes for high-viscosity, heavy materials — putty, airless plaster and heavy architectural coatings. Larger tips demand more flow and pressure than smaller machines can deliver, so check the maximum supported tip size of your airless sprayer before ordering. Choose the size for your material.

Rigid extension that fits between the spray gun and the tip to reach ceilings, high walls and floors without a ladder or bending. Choose the length for your working height.

High-pressure union that joins two airless hoses of the same size to extend your reach. Select the thread size to match your hoses.

Push-in filter for the spray-gun handle that screens debris before the tip, preventing clogs and spitting for a cleaner finish. Choose a coarser mesh for heavy coatings or a finer mesh for smooth finishes.

High-pressure reducing coupling that joins a 1/2″ airless hose to a 1/4″ one. Rated 227 bar (3300 psi).

Fine filter for the pump manifold that screens material after the pump and before the hose. Cleaner flow means fewer tip clogs and a smoother finish.

Tip holder and guard for reversible airless tips, with 360° rotation for a natural spraying angle. Fits standard airless spray guns and keeps the tip seated safely under pressure.

Professional airless spray gun rated to 270 bar, compatible with standard reversible tips and a 1/4″ NPSM hose inlet. A direct spare or second gun for GROG airless sprayers.

Coarse intake strainer for the suction tube that keeps larger debris out of the pump. A 1″ connection fits standard airless suction sets.

10-metre extension hose for GROG airless sprayers. It adds reach to an existing hose for high walls, ceilings and areas away from the pump without repositioning the machine.

Carry bag and protective cover for GROG airless equipment. It helps protect the sprayer and its parts during transport and storage and keeps accessories together between jobs.

Set of five airless spray tips for GROG spray guns. Having several tip sizes to hand lets you match nozzle output and fan width to different materials and surfaces without buying tips singly.

Inline filter set for GROG airless sprayers. The filters trap particles before the tip, helping to prevent blockages and keep the spray pattern clean during application.

Cleaning kit for GROG airless sprayers. Thorough cleaning after each use helps clear material from the pump, hose and gun and supports reliable operation and tip life.