Airless High-Pressure Hose 1/4″
A professional 1/4″ airless high-pressure fluid hose that carries coating material from the pump to the spray gun with a steady, even flow — for comfortable, controlled work on walls, façades and other large surfaces. Standard 1/4″ fittings give wide compatibility with common airless sprayers, and a spring strain relief at each end protects the hose where it flexes most. Choose the length that suits the job.
Key features
- —Standard 1/4″ fittings for wide compatibility with airless sprayers
- —Steady, even material flow for a consistent spray pattern
- —Spring strain relief at both ends to reduce kinking and wear
- —Flexible and easy to handle, with a durable outer jacket for site work
- —Can be joined to another hose to extend your reach
- —Available lengths: 4.5, 8, 10, 15, 20 and 30 m
Suitable materials
Common airless coatings such as emulsion, acrylic, latex and façade paints, primers and lacquers.
Good to know
Match the hose length to your work area, and keep the connections clean and firmly tightened for a reliable high-pressure seal. Shorter lengths suit rooms and detail work; longer lengths suit façades and large areas.
You might also like






